|Home||» Products||» Sealants||» TWO COMPONENT EPOXY|
TWO COMPONENT EPOXY
TWO COMPONENT EPOXY
Hind Sealant E is a two component epoxy sealant comprising resin and hardener and premixed special filler.
The components are pre measured and fully mixed at a time and consumed.
Hind Sealant E is used as sealant for fine cracks in structural members, tile joints, metal joints, sealing holes
for complete water tightness etc.
· Excellent bonding with substrate
· Easy to mix and apply.
· Complete water tightness.
· Hardens after setting and thus not damaged by sharp objects.
· Can be applied without primer also
· Painting can be done over Hind Sealant E surface
Entire contents of Comp-A and Comp-B are to be taken on a clean mixing tray and thoroughly mixed by a
The contact surface between the putty/sealant has to be thoroughly cleaned from all dust, dirt oily or greasy
materials and dry. Priming with Hind ERS 21P is required for porous substrate and substrates which are
subjected to movement. If cracks are filled with Hind Sealant-E it is to be chiselled for making V groove about
10mm -12 mm deep and wide and to be primed with Hind ERS 21 P before application of sealant. After the
sealant is applied it is to be tooled with a sharp knife.
Aspect Comp A-Semi Solid Paste, Comp.B –Semi Solid Paste
Colour Off white (Mixed material)
Density 1350 – 1400 Kg/m3 (Mixed material)
Working Time 40-45 minutes at 270 C +20 C
Compressive Strength Min 30 N/mm2 + 2N/mm2 in 24 hours at 270 C +20 C
70 N/mm² + 5 N/mm2 in 7 days at 270 C +20 C
Bond Strength 1.5 to 2 N/mm2 in 7 days at 270 C +20 C
Tensile Strength 14-17.5 N/mm2 in 7 days at 270 C +20 C
Flexural Strength 25-35 N/mm2 in 7 days at 270 C +20 C
Chemical Resistance Is not affected by wide range of chemicals, oils etc.
12 months from the date of manufacture in unopened condition and stored in a cool place under shade.
3 Kg Container
Hind Sealant E is non-toxic. Any splashes to the skin or eyes must be washed with clean water immediately.