Cookie Img
Send Inquiry Send SMS    Call Me Free
Home » Products » Epoxy Grout & Mortar » HIGH STRENGTH POURABLE / INJECTABLE EPOXY GROUT

HIGH STRENGTH POURABLE / INJECTABLE EPOXY GROUT

HIGH STRENGTH POURABLE / INJECTABLE EPOXY GROUT
HIGH STRENGTH POURABLE / INJECTABLE EPOXY GROUT
Product Code : 004
Brand Name : HIND ERS 212
Product Description

HIGH STRENGTH POURABLE / INJECTABLE EPOXY GROUT

Hind ERS 212 is a three component solvent free, free flowing, non-shrinking fast curing epoxy resin system
used for pourable into concrete for carrying out structural repairs. The system is insensitive to water and due to
higher density it displaces the water thus making application on damp surface. The cured system possesses high
mechanical strength, non-shrinking properties, excellent adhesion, and is chemical resistant typical of all epoxy
resin system. Cracks and voids of any nature can be successfully sealed/ bonded with Hind ERS 212. Though it
has high strength, the cured material does not become brittle and remains slight flexible. Hind ERS 212 is
manufactured in pre-measured quantities. Component A- Resin, Component B-Polyamide hardener and
Component C- Special Aggregate (Graded Silica flour/sand).

 ADVANTAGES
· Free flowing and non-shrink system.
· Resistance to acids and alkalis.
· Moisture insensitive
· Useful and helps rapid installation process with high strength.
· Very useful in sealing wider cracks
MIX RATIO
Component A - 2 parts by weight: Component B -1 parts by weight: Component C- 2 parts by weight.

APPLICATION

Preparation of Surface
The area to be treated should be properly cleaned by wire brush. Injection ports/nozzles are fixed at a regular
spacing. The ports/nozzles to be sealed on the surface to prevent the grout from oozing out at the time of
injection operation. It can be directly poured into wider cracks to fill it by gravity.
Mixing
Component-B Polyamide Hardener and Component –A Resin are mixed at first, then Component C Special
Aggregate is slowly mixed well, so as not to entrap air into the product. Mixing is done for 2-3 minutes using a
drill and paddle (maximum 200-300 R.P.M.).Only required quantity of material to be mixed for immediate use.
The mixed material should be kept undisturbed for 2-3 minutes, so that if any entrapped air is there it escapes
from the mix.


Injection
The grout mixture is pumped through the ports/nozzles fixed by means of positive displacement pump till there
is refusal from the nozzle or the mixture comes out of the adjacent nozzle.


Cleaning: Clean all tools & equipment immediately after use with, Xylene, Toluene or suitable solvent.

PROPERTIES

Aspect                                                         Comp.A-Liquid, Comp.B -Liquid, Comp.C- Powder
Colour                                                        Off white (Mixed material)
Density                                                       1350 –1400 Kg/m3 (Mixed material)
Mix Ratio                                                   Comp.A : Comp.B : Comp C = 2:1:2 by weight
Working Time                                            40-45 minutes at 270 C +20 C
Compressive Strength                               Min 30N /mm2 + 2N/mm2 in 24 hours at 270 C +20 C
70 + 5N /mm2 in 7 days at 270 C +20 C
Bond Strength                                           1.5-2N /mm2 in 7 days at 270 C +20 C
Tensile Strength                                        14-17.5 N/mm2 in 7 days at 270 C +20 C
Flexural Strength                                      25-35 N/mm2 in 7 days at 270 C +20 C
Chemical Resistance                                 Is not affected by wide range of chemicals, oils etc.
Shrinkage                                                 Non-shrink


SHELF LIFE
12 months if it is in unopened condition. Should be stored in a cool dry place away from direct sunlight.


PACKING
5 Kg Kit or as required.


HANDLING PRECAUTION
Hind ERS 212 is non-toxic but ingestion is to be avoided. Any splashes to the skin must be washed with water.
If contact with eyes occurs, wash well immediately with water and seek medical advice.

 




HINDCON CHEMICALS LIMITED
AN ISO 9001:2008 COMPANY
62 B, Braun field Row, Vasudha, Kolkata - 700027, West Bengal, India
Mr. R. S. Banerjee (Director)
   Call Me Free Offline Send SMS Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
HINDCON CHEMICALS LIMITED All Rights Reserved.